What did you make?

Longrifle

Old Mossy Horns
Contributor
Found a guy awhile back selling some old oak church pews, they were at least 60-70 years old. Some were solid, some were in pieces. This is a bed I cobbled together from some of them. I've since ripped and planed a bunch of the lumber down for shelves, window sills, and trim.
Gave him $50 for the pews, couldn't have bought an oak 1x at Lowes for that.....
 

Attachments

  • pew bed.jpg
    pew bed.jpg
    133.3 KB · Views: 53

Hunterreed

Twelve Pointer
I got these old stands out of the shed that I used to make before I got a welder. Short pieces of 1 inch steel tubing sold by the pound at scrap yards,threaded rod and nuts and washers anyone with a drill and a sawzall or grinder and cutting wheel can make some heavy duty hang on stands this way. Some I have for twenty years now by replacing plywood every few years20211014_130218.jpg
 

dfitzy

Ten Pointer
Contributor
Walk in cooler (posted in DIY section). Built a playset with no plans, just a vision. Made the decoy 8’x8’ at 5 ft off the ground. Three swings, a climbing wall and steps. Bought all of the supplies pre-Covid (Feb 2020). I considered pulling it down and selling the wood to make a profit but my wife said no.
 

Attachments

  • 42E3BD08-5A05-4CE6-9F77-5BE5E53AD58A.jpeg
    42E3BD08-5A05-4CE6-9F77-5BE5E53AD58A.jpeg
    265.7 KB · Views: 10
  • 8CC34E91-6833-4FD6-A2AD-2EB21FA633DE.jpeg
    8CC34E91-6833-4FD6-A2AD-2EB21FA633DE.jpeg
    282.7 KB · Views: 10
  • 498D318C-0CFC-4ECF-B92F-3B569354850C.jpeg
    498D318C-0CFC-4ECF-B92F-3B569354850C.jpeg
    227.2 KB · Views: 11
  • A6D630E5-C23D-4E14-A865-CA351A7E9FDF.jpeg
    A6D630E5-C23D-4E14-A865-CA351A7E9FDF.jpeg
    246.8 KB · Views: 11

v8stang289

Twelve Pointer
Built a playset with no plans, just a vision. Made the decoy 8’x8’ at 5 ft off the ground. Three swings, a climbing wall and steps.

Built this one a few years ago for my boys. Bought the wood and the swing, got the slide from my BIL had the rings from my swing set when I was a kid. The rest is from scrap metal I had.

20190510_212752.jpg
 

Buxndiverdux

Old Mossy Horns
L28fAB0.jpg

A8GqDlF.jpg

IwDbT3g.jpg

B2FNXf2.jpg
 

BuzzCut

Ten Pointer
A few things I’ve made on my Shapeoko CNC.


6D0529B9-1D8B-4998-8BEE-36D5CF8E6436.jpeg
 

Attachments

  • B6B378B8-3BAF-49E8-8704-BC2BF055ACB8.jpeg
    B6B378B8-3BAF-49E8-8704-BC2BF055ACB8.jpeg
    265.9 KB · Views: 1
  • A9BC6203-9600-432F-A771-C0B2BF9DA303.jpeg
    A9BC6203-9600-432F-A771-C0B2BF9DA303.jpeg
    109.9 KB · Views: 1
  • EBC907C2-AC4D-48FD-9714-DCBC1F21B5F9.jpeg
    EBC907C2-AC4D-48FD-9714-DCBC1F21B5F9.jpeg
    214.4 KB · Views: 1
Top