I use a small, two-brick wall mounted propane heater to warm this place up. Most of the time it's set on low(one brick lit) but lately when I try to use the second brick to warm it up faster after a short time it poofs and starts stuttering for lack of a better description and I have to dial it back to the single brick. I've vacuumed it out, blown it out...can't seem to make it stop. It's on a fresh 100# cylinder so I know it's not starving.
I used it all last winter with no problems with the same regulator and a 20# cylinder. Any ideas before I replace it?
I used it all last winter with no problems with the same regulator and a 20# cylinder. Any ideas before I replace it?