New Tactacam Reveal X cell camera

82ndAirborneVet

Four Pointer
Got them in and put them out and the bear box was well worth the investment! However the antenna's are weak and fair game outside the box.. Nothing some Gorilla Glue can't fix if the bear leaves it behind. I have already had to fix 1 and the signal still comes in Strong! Notice the antenna hanging down in the right side of the bear pic and it still sent pics just fine barely attached.
 

Attachments

  • 865814040775585-100-3-07052021020644-W1000302.jpg
    865814040775585-100-3-07052021020644-W1000302.jpg
    50.1 KB · Views: 3
  • 865814040777086-100-3-06272021112234-W1000015.jpg
    865814040777086-100-3-06272021112234-W1000015.jpg
    50.4 KB · Views: 3

82ndAirborneVet

Four Pointer
I received my Reveal X camera on Thursday and my Bear Box today. I hope to get out maybe Wednesday and get it setup in the woods where I’ll be hunting this fall!
So with the bear boxes something I have found is this. Still use the strap because the back of the camera sticks through the box so to hold it in place at first the strap helps. Then get you some 4" or 6" wood screws but you will need some washers and you can use an extension and put screws into the tree and it is rock solids but the holes are in a weird spot in the top corners of the box for the screws. Just something I learned as I went. If you screw the box to the tree first the camera wont fit in the box and close!
 
Top