Just a little 6.5 mm bullet porn
- Thread starter Downeast
- Start date
FishHunt
Old Mossy Horns
Those should work well in my .260Rem.
<>< Fish
<>< Fish
Mr.Gadget
Old Mossy Horns
I have been trying to get an ar15 build using a 5.56 case and 6.5 bullet.
The guy getting me the cutter for dies and or barrel and dies has falling off the face of the earth.
Im wanting to do something in the lines the 300 blackout, but 6.5.
The guy getting me the cutter for dies and or barrel and dies has falling off the face of the earth.
Im wanting to do something in the lines the 300 blackout, but 6.5.
FishHunt
Old Mossy Horns
Mr.Gadget
Old Mossy Horns
Want to keep all the same parts of another AR and just a barrel change.
Most the others use a different bolt and mags along with other parts.
Most the others use a different bolt and mags along with other parts.
FishHunt
Old Mossy Horns
The 6mmTCU and 7mmTCU are based on the .223Rem case. There is even a 6.5mmTCU based on the .223Rem. They are still popular with the IMHSA crowd and dies/reamers are not hard to come by. Would those work within the standard AR set up?
<>< Fish
Mr.Gadget
Old Mossy Horns
I had looked at that sometime back.
ALso the 6.5 PCC
most what I see with the TCU was for bolt guns and In the AR with a light bullet 80 to 120.
Was wanting a 130 to 140 grn range.
ALso the 6.5 PCC
most what I see with the TCU was for bolt guns and In the AR with a light bullet 80 to 120.
Was wanting a 130 to 140 grn range.
41magnum
Twelve Pointer
Don't forget the 6.5 Creedmoor or 6.5 Grendel !