00 3 inch reloads

klim

Twelve Pointer
Be messing with trying to develop some 3 inch 00 15 pellet loads. (Nickel plated shot) Here’s my results at 40 yards with my Full (left picture) and XFull Kicks Buckicker (picture on right) at 40 yards.
 

Attachments

  • 5DCC6899-97E4-43CB-9B08-758395D977CF.jpeg
    5DCC6899-97E4-43CB-9B08-758395D977CF.jpeg
    151.8 KB · Views: 33
  • 94542FD2-B023-4FDA-834E-1815BA64787F.jpeg
    94542FD2-B023-4FDA-834E-1815BA64787F.jpeg
    162.6 KB · Views: 32

41magfan

Twelve Pointer
Contributor
Looks good! The load on the left seems to suffer a tad from the "donut" effect which often means too much choke, but the right target would lead you to believe the same load likes being constricted by that particular choke tube.
 

Redheadduck

Eight Pointer
Be messing with trying to develop some 3 inch 00 15 pellet loads. (Nickel plated shot) Here’s my results at 40 yards with my Full (left picture) and XFull Kicks Buckicker (picture on right) at 40 yards.
Looks like all pellets are within a 16 inch circle or so? I'd say it looks pretty good. I've been wanting to work up a #1 buck load in 3in.
 

shotgunner

Ten Pointer
Plan on ordering a different wad to work with my 00 loads. I just do not get near as good or consistent pattern with the 00 (.33 cal.) as I can with 0 (.31 or .32 cal). Let me know if you get a good recipe.
 

darkthirty

Old Mossy Horns
I know it’s probaly beating a dead horse but get you some TSS in T’s or BB’s and prepare to have your mind blown.
 

klim

Twelve Pointer
Plan on ordering a different wad to work with my 00 loads. I just do not get near as good or consistent pattern with the 00 (.33 cal.) as I can with 0 (.31 or .32 cal). Let me know if you get a good recipe.

Shotgunner I’m not even using a wad with this load. Im just using a X12X seal and buffer.
 
Top